Shaft Sleeve Gr2 ASTM B348 CustomTtitanium Parts Titanium Customized
| Origin |
Baoji, Shaanxi, China
|
| Customized |
Customized |
| Certification |
GB/T19001-2016 idt ISO9001:2015 GJB9001C-2017 |
|
Port of delivery
|
Xi'an port, Beijing port, Shanghai port, Guangzhou port, Shenzhen port
|
|
Grade
|
Gr2 |
Titanium is a widely used metal, due to its light weight, higher strength than aluminum alloy, can maintain a higher strength than aluminum at high temperature and is highly valued by the aviation industry. Titanium has a wide range of uses in the military industry.
The shaft sleeve is a cylindrical mechanical part on the rotating shaft, and is an integral part of the sliding bearing. Generally speaking, the shaft sleeve and the bearing seat adopt interference fit, and the shaft is used for clearance matching.
Shaft sleeve refers to the sleeve on the propeller shaft or stern shaft. The bearing is a component that can fix and reduce load friction coefficient in the process of mechanical transmission.Only hydrofluoric acid, concentrated hydrochloric acid, concentrated sulfuric acid can act on it. The presence of impurities in titanium greatly affects its mechanical properties, especially the interstitial impurities (oxygen, nitrogen, carbon) can greatly improve the strength of titanium and significantly reduce its plasticity. The good mechanical properties of titanium as a structural material are achieved by strictly controlling the appropriate impurity content and adding alloying elements.
The similarity between axle sleeve and bearing is that both of them bear the load of the shaft.
The difference between the two is that the shaft sleeve is an integral structure, and the rotation is the relative movement between the shaft and the shaft sleeve; The bearing is split type, and the relative movement of the inner and outer rings of the bearing itself is rotated. But in essence, the shaft sleeve is actually a kind of sliding bearing.
The bearing bush is equivalent to the outer ring of the sliding bearing, the shaft sleeve is integral, and the relative shaft is moving, while the bearing bush is partial, and the relative shaft is rotated.
Benefits:
1. Low density and high strength
2. Customized according to the drawings required by customers
3. Strong corrosion resistance
4. Strong heat resistance
5. Low temperature resistance
6. Heat resistance
Product Tags:
|
|
GJB9001C-2017 Titanium Bearing Bushing Shaft Sleeve Images
|
